Cubster cleaning

Took the rear wheels off and removed about 20 litres of grass from the top of the deck and gearbox. White greased all visible mounts, and this was enough to stop the reverse lever jamming on.
Installed roll/pitch monitor. Also gives engine + gearbox temp and revs.
Backup hour counter saves running hours every 30s. Bit easier to use than the built in one which works in decimal hours eg 10.1 hours is 10 hours, 6 minutes.
Can also open the gates remotely.


Sharpened blades. Torque to 80lb
Stretched leaf spring on clear out system. Hopefully this will stop the lever disengaging